Showing posts with label 2002.02(92). Show all posts
Showing posts with label 2002.02(92). Show all posts

Wednesday, June 12, 2024

Current Status and Prospects of Carbonization Technology 2002.02 (92)

In recent years, the Law Concerning Special Measures against Dioxin and the Waste Disposal and Public Cleansing Law have been revised, resulting in stricter regulations on waste incineration. At the same time, various recycling laws have been legislated to realize a resource-recycling society, and the cost of waste treatment has skyrocketed as final disposal sites become increasingly tight. As a result, there is a strong demand to shift waste disposal from incineration and landfill to recycling.


As a result, the need for an alternative recycling method to simple incineration has emerged for organic wastes (construction waste wood, food waste, sewage sludge, livestock manure, etc.), which were previously disposed of in landfills after intermediate treatment such as dehydration, drying, and incineration. In particular, “carbonization” is attracting attention.


Current Status and Direction of Carbonization Furnace Development

A typical example of carbonization is the production of charcoal. Currently, traditional charcoal-making techniques (e.g., tsuki-kilns and prock furnaces) as well as flat furnaces, screw furnaces, rotary kilns, and fluidized bed furnaces for industrial mass production are used for its production. However, for materials with well-defined properties, such as thinned wood and sawmill waste, there is little need for dioxin control and conventional technologies can be used. However, for carbonization equipment used as an alternative to waste incineration, the problem of dioxin is unavoidable.


What is required of carbonization equipment for recycling purposes is to obtain good quality carbonized material at low cost without generating dioxin. To achieve this, the furnace must be sealed and oxygen-free (or low oxygen), steamed at high temperatures, and the contents stirred to ensure homogeneous carbonization.


Characteristics and Advantages of Carbonization Equipment

Rotary kilns are currently the most highly regarded carbonization equipment available. In the rotary kiln method, the material is placed in a rotating cylindrical furnace and carbonized by internal or external heat. This method has the following advantages


Various organic materials can be carbonized: Anything with organic content can be carbonized, and the organic content in the raw material can be converted into combustible dry distillate gas to save fuel.

Simple structure and fewer breakdowns: Fewer breakdowns are required because there are no mechanical parts in the furnace.

No need for dioxin countermeasures: Although advanced sealing technology is required, dioxin removal equipment and stoker are no longer necessary, making the kiln superior in terms of installation space and equipment price.

Homogeneous carbonization: Rotation of the kiln eliminates uneven baking.

Because this is a well-established field of technology, a large number of companies, from major machinery manufacturers to small and medium-sized companies and venture businesses, have entered the carbonization equipment market, developing equipment ranging in scale from 100 kilograms per day to several tens of tons per day.


Expanding Charcoal Market and New Applications for Organic Waste

One of the reasons carbonization is attracting so much attention is the expanding range of applications for charcoal. While it is often difficult to distribute products in the recycling business, the prospects for carbonized products are relatively bright. Charcoal, which was produced at a rate of about 2.7 million tons per year in the 1940s, has been used as a primary fuel, but in recent years, new demands other than fuel have arisen and production has increased.


The excellent functionality of charcoal as a material has expanded its diverse applications to include soil conditioners, humidity regulators, deodorizers, and activated carbon. In particular, charcoal has been proven to adsorb toluene, xylene, and formaldehyde, which are substances that cause sick building syndrome, and the use of charcoal in wood waste, such as thinned lumber, pruned branches, mill ends, and saw dust, is increasing.


Carbonization of Construction Wood Waste

Construction waste wood is the most suitable raw material for charcoal. In particular, the full enforcement of the Construction Materials Recycling Law in May 2002 will provide a tailwind. According to a survey by the Ministry of Land, Infrastructure, Transport and Tourism, there is an urgent need to develop applications for construction waste wood, as its reuse has not progressed. Kumagaya Carpon and other companies in Kumagaya City, Saitama Prefecture, are developing businesses in this field, adding value through carbonization.


Carbonization of Municipal Solid Waste

Of the approximately 51 million tons of general waste generated annually, about 39 million tons are incinerated. Although the recycling rate is increasing due to the expansion of sorted collection by municipalities, there is a need to strengthen dioxin countermeasures as incinerators are upgraded. Carbonization of municipal solid waste is expected to be a means of obtaining high added value, and Itoigawa City in Niigata Prefecture plans to introduce a carbonizing furnace and use it as an alternative fuel to coal.


Carbonization of Sewage Sludge

Japan's sewage penetration rate reached 62% at the end of 2000, and recycling of sewage sludge generated at sewage treatment plants is being promoted. A sewage sludge carbonization facility is in operation at the Lake Biwa Konan Chubu Purification Center in Kusatsu City, Shiga Prefecture, and is used as a soil conditioner and deodorizing material.


Carbonization of Food Waste

The Food Recycling Law enacted in 2001 mandates the control of food waste generation and recycling. Food waste is often used as fertilizer or feed, but new applications are being developed through the use of carbonization technology. For example, technology has been developed to produce activated carbon by using limonene extracted from citrus fruits for pretreatment to remove salt and oil.


Carbonization of Livestock Excrement

Proper treatment and recycling of livestock excrement is also important. At a poultry farm in Hokkaido, chicken manure is carbonized to produce high-value-added fertilizer, creating a recycling system.


Conclusion

Carbonization is effective as a device for reducing the volume of organic waste that is difficult to dispose of due to its high water content. In addition, the generated charcoal has a higher commercial value than compost or molten slag, making it easy to establish a recycling business. In addition, new demands are expected for sick house syndrome countermeasures and greening projects. In the future, carbonizing furnaces are expected to expand their market as “calcination furnaces” as their performance is required to meet various organic waste recovery methods and product applications.








近年の廃棄物処理と再資源化の動向:炭化技術の現状と展望 2002年2月 (92)

近年の廃棄物処理と再資源化の動向:炭化技術の現状と展望

近年、ダイオキシン対策特別措置法や廃棄物処理法の改正により、廃棄物の焼却に対する規制が厳しくなっています。同時に、資源循環型社会の実現に向けた各種リサイクル法が法制化され、最終処分場の逼迫に伴い、廃棄物処理費用も高騰しています。これにより、廃棄物処理は焼却・埋立てから再資源化への転換が強く求められるようになりました。

その結果、従来は脱水・乾燥・焼却などの中間処理の後に埋立処分されていた有機性廃棄物(建設廃木材、食品廃棄物、下水汚泥、家畜糞尿など)についても、単純焼却に代わる再資源化手法のニーズが浮上しています。特に「炭化」が注目を浴びています。

炭化炉開発の現状と方向性

炭化の代表例としては木炭の製造があります。現在、その製造には伝統的な炭焼き技術(築窯やプロック炉など)と、工業的な大量生産を目的とした平炉、スクリュー炉、ロータリーキルン、流動炉などが使用されています。しかし、間伐材や製材所廃材など、性状がはっきりしているものについてはダイオキシン対策の必要性が低く、従来技術で対応できます。しかし、廃棄物焼却処理の代替としての炭化装置においては、ダイオキシン問題は避けられません。

リサイクルを目的とした炭化装置に求められるのは、ダイオキシンを発生させずに低コストで良質な炭化物を得ることです。これを実現するためには、炉を密閉し無酸素(あるいは低酸素)にして高温で蒸し焼きにし、均質に炭化が進むように内容物を撹拌することが必要です。

炭化装置の特性と利点

現状で評価が高い炭化装置としてロータリーキルンがあります。ロータリーキルン式は回転する円筒形の炉に原料を入れ、内熱または外熱で炭化させる方式です。この方式には以下の利点があります:

  1. 多様な有機分を炭化可能:有機分を含んだものであれば何でも炭化でき、原料に含まれる有機分を可燃性の乾留ガスに変えて燃料を節約できます。
  2. 単純構造で故障が少ない:炉内に機械的な部分がないため、故障が少なくなります。
  3. ダイオキシン対策が不要:高度なシール技術が要求されるものの、ダイオキシン除去装置やストーカが不要になり、設置スペースや装置価格の面で優れています。
  4. 均質な炭化:キルンの回転により焼きムラがなくなります。

この技術が確立されている分野であるため、炭化装置には大手機械メーカーから中小・ベンチャー企業まで多数が参入しており、日量100キログラムから数十トンまでの規模の装置が開発されています。

炭市場の拡大と有機性廃棄物の新用途

炭化が注目される理由の一つは、炭の用途が広がっていることです。リサイクル事業において生成物の流通が難しい場合が多い中、炭化物は比較的見通しが明るいです。昭和10年代には年間270万トン余り生産されていた木炭は、主要燃料として利用されてきましたが、近年では燃料以外の新しい需要が生まれ、生産量が増加しています。

炭の持つマテリアルとしての優れた機能性により、土壌改良材、調湿材、脱臭剤、活性炭など多様な用途が広がっています。特に、シックハウス症候群の原因物質であるトルエン、キシレン、ホルムアルデヒドの吸着効果も立証されており、間伐材や剪定枝、製材所の端材や鋸くずなどの木質系廃棄物の炭利用が拡大傾向にあります。

建設廃木材の炭化

木炭の原料として最も適しているのが建設廃木材です。特に2002年5月に建設資材リサイクル法が完全施行されることは追い風となります。国土交通省の調査によると、建設発生木材の再利用が進んでいないため、用途開発が急務です。埼玉県熊谷市の熊谷カーポンなどがこの分野で事業を展開しており、炭化処理による高付加価値化が進められています。

都市ごみの炭化

年間約5100万トンの一般廃棄物が排出される中、約3900万トンが焼却されています。自治体による分別回収の拡大によりリサイクル率は向上していますが、焼却炉の更新に伴いダイオキシン対策の強化が求められています。都市ごみの炭化は、高付加価値を得る手段として期待されており、新潟県糸魚川市では炭化炉が導入され、石炭の代替燃料として利用される計画です。

下水汚泥の炭化

日本の下水道普及率は2000年末で62%に達しており、下水処理場で発生する下水汚泥の再資源化が進められています。滋賀県草津市の琵琶湖湖南中部浄化センターでは、下水汚泥の炭化施設が稼動しており、土壌改良材や脱臭材として利用されています。

食品廃棄物の炭化

2001年に施行された食品リサイクル法により、食品廃棄物の発生抑制とリサイクルが義務付けられています。食品廃棄物は肥料や飼料として利用されることが多いですが、炭化技術を用いることで新たな用途が開発されています。例えば、柑橘類から抽出したリモネンを前処理に使うことで塩分や油分を除去し、活性炭を製造する技術が開発されています。

家畜排泄物の炭化

家畜排泄物の適正な処理とリサイクルも重要です。北海道の養鶏場では、鶏糞を炭化して高付加価値の肥料を製造し、循環システムを構築しています。

まとめ

炭化処理は、含水率が高く廃棄処分が難しい有機性廃棄物の減量装置として有効です。また、生成された炭はコンポストや溶融スラグと比較して高い商品価値を持ち、リサイクル事業として成立しやすいです。さらに、シックハウス対策や緑化事業などの新しい需要も見込まれます。今後、各種有機性廃棄物の回収方法や生成物の用途に応じた性能が求められ、炭化炉は「焼成炉」として市場拡大が期待されます。